Mon panier  

(vide)

Transport 0,00 €
Taxe 0,00 €
TOTAL TTC 0,00 €

Voir Valider

AEM NEWS NISSAN JUKE

2015-05-27 10:11:29
 

BOOST 2013, 2014, 2015 Nissan Juke & Juke NISMO 1.6L L4 Turbo Power With AEM Cold Air Intake

 

The Nissan Juke is a sporty turbocharged crossover SUV from the Nissan Motor Corporation. The standard Nissan Juke is equipped with a 1.6-liter direct injected turbocharged engine rated at 188 horsepower. In 2013 Nissan introduced a NISMO (Nissan’s motorsports and performance division) tuned Juke and cranked up power output another 9 horsepower and 7 lb-ft of torque. The small, but energetic, 1.6L turbocharged engine found in 2013, 2014, and 2015 Nissan Juke and Juke NISMO models makes for a fun-to-drive crossover SUV, but reducing air intake restriction can help the engine’s turbo charger spool up quicker, make more power, and provide for an even better driving experience.

2013, 2014, and 2015 Nissan Juke and Nissan Juke NISMO 1.6L turbo owners looking to add more power can easily do so with an AEM cold air intake system. Reducing air intake tract restriction, and turbulence, allows an AEM CAI to increase horsepower, torque, acceleration, and provide better engine sound. At AEM Induction Systems our engineers design cold air intake systems as a fully integrated component of the vehicle. Improved airflow is only part of the power equation.

The 2013, 2014, and 2015 Nissan Juke and Nissan Juke NISMO 1.6L turbo AEM cold air intake system relocates the oversized reusable AEM Dryflow synthetic air filter outside of the engine compartment by replacing factory intake components with a charcoal gray powder coated aluminum air intake tube. This allows the AEM Nissan Juke CAI to provide cooler, denser, outside air for more efficient combustion. More efficient combustion, combined with reduced airflow restriction, results in better performance for 2013-2015 Nissan Juke 1.6L models.

The 2013-2015 Nissan Juke cold air intake is designed to improve horsepower and torque delivery across the entire RPM range compared to the factory air filter box system. On the dyno, a 2013 Nissan Juke 1.6L with a manual transmission equipped with AEM CAI 21-734C made an estimated additional 14 horsepower and an impressive 13 lb-ft of additional torque at 5,600 RPM . In addition to increasing horsepower, lowering air intake tract restriction and increasing airflow will help the Juke’s turbocharger spool up quicker, which in turn improves acceleration, drivability, and gives the Nissan Juke a sportier engine sound.

This AEM cold air intake is equipped with a non-oiled oval-shaped AEM Dryflow air filter which delivers high airflow, excellent filtration, and exceptional engine protection. The mandrel bent aluminum cold air intake tube is finished with a durable charcoal gray powder coat finish to provide long lasting good looks.

The AEM cold air intake system for 2013, 2014, and 2015 Nissan Juke 1.6L turbo models is an excellent bolt on performance upgrade which includes all the necessary hardware and step by step installation instructions. To provide peace of mind, AEM Induction Systems stands behind its products with a Lifetime Limited Warranty.

The 21-734C AEM cold air intake system will provide increased performance and excellent engine sound for the following Nissan vehicles:

2015 Nissan Juke 1.6L L4 
2014 Nissan Juke 1.6L L4 
2013 Nissan Juke 1.6L L4

 

Spare Nissan Juke Dryflow Air filter Or Custom CLamp-on Filter from AEM Intakes


The AEM Dryflow synthetic air filter 21-2127DK was first developed for the 2013, 2014, and 2015 Nissan Juke and Nissan Juke NISMO AEM cold air intake. This Dryflow clamp-on universal air filter can be purchased as an extra filter for an AEM CAI, or for a custom air intake application. This air filter was designed to maximize air filter surface area and still fit within a limited amount of space. The oval shape of AEM Dryflow clamp-on air filter, number 21-2127DK, combined with the pleated synthetic filter media will provide high airflow, excellent filtration, long service intervals, and exceptional engine protection

AEM clamp-on Dryflow air filter, number 21-2127DK, was first developed for the 2013, 2014, and 2015 Nissan Juke and Juke NISMO AEM cold air intake to maximize filter area within limited space


AEM Dryflow clamp-on air filter 21-2127DK has an oval shape measuring 6-1/16” long by 4-1/2” wide. This air filter is 5-1/8” tall and incorporates a 2-3/4” inside diameter mounting flange. If purchased as a spare air filter for an AEM cold air intake, such as 21-734C for the 2013-2015 Nissan Juke 1.6L, this clamp-on Dryflow air filter is covered by a lifetime limited warranty. If 21-2127DK is used for any custom, racing, or off road use it is warranted against defective materials or workmanship for one year only.

The base of 21-2127DK AEM Dryflow clamp-on air filter has a 2.75” inner diameter CAI mounting flange

Advanced AEM Dryflow, non-woven, synthetic air filter media allows for easy cleaning, durable service, and excellent filtration without the need for air filter oil. When it does come time to service an AEM Dryflow cold air intake filter, cleaning can be easily completed using the AEM air filter cleaner 1-1000. Cleaning is performed by following a simple four step process and the AEM dry filter does not require oil. No oil means the filter can be returned to service sooner and with less effort.